The AirTAC Airtac SC32 Standard Cylinder SC32X105N is a genuine double-acting standard air cylinder with a Ø32mm bore and 105mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X105N is a double-acting tie-rod cylinder with a 32 mm bore and 105 mm stroke, fitted with NBR (nitrile) seals for standard-temperature pneumatic circuits. At 0.5 MPa it generates 402 N pushing force and 345 N pulling force, rising to 724 N push at the maximum operating pressure of 0.9 MPa.
This model uses a 12 mm piston rod with an M10x1.25 rod thread and PT1/8 ports. The adjustable air cushion (21 mm length) decelerates the piston smoothly at each end of stroke. With a body length A of 140 mm, the total extended length is approximately 245 mm. The 105 mm stroke is a standard option within the 32 mm bore's 1000 mm maximum standard stroke range.
| Model | Airtac SC32 Standard Cylinder SC32X105N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 105 mm stroke and 402 N push force at 0.5 MPa reliably actuates diverter gates on compact conveyor lines, handling lightweight packages with crisp, repeatable motion.
Ideal for light-duty assembly jigs where the 32 mm bore provides controlled clamping force without distorting delicate components, aided by the adjustable cushion for quiet operation.
The NBR-sealed SC32X105N works well in agricultural seed sorting equipment, opening and closing dispenser slides in dusty environments where standard temperature ranges are maintained.
Choose the SC32 bore when your application needs up to 402 N of push force at 0.5 MPa. If you require more force, step up to the SC40 bore which provides 628 N at the same pressure. For lighter, more compact installations the SC32 is often the right balance of size and power.
When replacing an existing cylinder, match five points: 32 mm bore, 105 mm stroke, PT1/8 port thread, basic mounting (no bracket), and no magnet. The SC32 is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders. For strokes above 300 mm on this bore, consider an external guide to protect the 12 mm rod from side-load bending.
Quick checklist
At 0.5 MPa the cylinder delivers 402 N extending (push) and 345 N retracting (pull). At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 cylinder, so mounting dimensions and tie-rod spacing will differ. It is a direct replacement only for another AirTAC SC32 tie-rod cylinder matching the bore, stroke, PT port thread, and NBR seal.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.