The AirTAC Airtac SC32 Standard Cylinder SC32X1060S is a genuine double-acting standard air cylinder with a Ø32mm bore and 1060mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X1060S is a double-acting tie-rod cylinder with a 32 mm bore and an extended 1060 mm stroke, exceeding the standard maximum of 1000 mm for this bore size. It delivers 402 N of push force at 0.5 MPa and 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod with an M10x1.25 thread.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly on the barrel for precise, contactless position sensing. The cylinder features an adjustable pneumatic cushion (21 mm length) at both ends to decelerate the piston smoothly, and uses standard PT1/8 ports with TPU seals for a working temperature range of -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X1060S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 1060 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1060 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1060 mm stroke and compact 32 mm bore are ideal for transferring small components between distant conveyor stations where a long, slim cylinder profile is needed, and the built-in magnet enables end-of-stroke verification.
Used to actuate long-throw diverter gates on packaging lines. The sensor-ready magnet confirms gate position, while the adjustable cushioning prevents hard stops that could disturb sorted items.
Suitable for lightweight vertical lifting masts in pick-and-place systems. The 724 N force at 0.9 MPa handles small payloads, but external guides are essential to manage the long stroke's side-load moment.
For applications requiring more force, stepping up to the 40 mm bore provides 628 N of push force at 0.5 MPa. Given the 1060 mm stroke, the slender 12 mm rod is susceptible to bending under side loads; an external linear guide or a guided cylinder configuration is strongly recommended to prevent rod bearing damage and ensure reliable operation.
When replacing this cylinder, match five key points: the 32 mm bore, the 1060 mm stroke, the PT1/8 port thread, the built-in magnet for sensor compatibility, and the basic tie-rod mounting footprint. This is a non-standard stroke length, so lead times may vary.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet on the piston, making it fully compatible with AirTAC CMSG, DMSG, and EMSG series reed and solid-state sensors that clamp directly onto the cylinder barrel.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.