The AirTAC Airtac SC32 Standard Cylinder SC32X110 is a genuine double-acting standard air cylinder with a Ø32mm bore and 110mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X110 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm diameter piston rod and 21 mm adjustable air cushion make it a precise actuator for light-to-medium linear tasks where space is tight.
With a 110 mm stroke, this model sits comfortably within the 1000 mm maximum standard stroke for the 32 mm bore. The body length A is 140 mm, giving a total extended length of approximately 250 mm. The PT1/8 ports and M10x1.25 rod thread are standard, and the cylinder operates on filtered air at 0.15-1.0 MPa across a -20 to +70 °C range.
| Model | Airtac SC32 Standard Cylinder SC32X110 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 402 N push force at 0.5 MPa is ideal for clamping light components in CNC fixtures or assembly jigs without distorting the workpiece.
Use the SC32X110 to operate small diverter gates on packaging conveyors, where the 21 mm cushion absorbs impact for smooth, quiet sorting.
The compact 140 mm body length fits neatly into laboratory automation platforms, providing reliable linear actuation for precise reagent dispensing.
Choose the SC32 bore for light positioning and clamping where force requirements are modest. If your application needs more push force, step up to the SC40, which provides 628 N at 0.5 MPa. Always match replacement cylinders on five points: bore (32 mm), stroke (110 mm), port thread (PT1/8), mounting accessory (basic), and magnet option (none).
For strokes over 300 mm on this 12 mm rod, side loads become a critical concern. While this 110 mm stroke is inherently rigid, any application with a radial force component should use an external guide or switch to a guided cylinder to prevent rod bending and premature seal wear.
Quick checklist
At 0.7 MPa operating pressure, the SC32X110 delivers 563 N of push force on the outstroke and 345 N of pull force on the instroke. The maximum theoretical force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 cylinder of the same bore and stroke. They are not dimensionally interchangeable. You must replace it with another AirTAC SC32 tie-rod cylinder or an exact equivalent.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.