The AirTAC Airtac SC32 Standard Cylinder SC32X1100S is a genuine double-acting standard air cylinder with a Ø32mm bore and 1100mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X1100S is a double-acting single-rod tie-rod cylinder with a 32 mm bore and an extended 1100 mm non-standard stroke. At 0.5 MPa it delivers 402 N push force and 345 N pull force, rising to 724 N of thrust at the maximum operating pressure of 0.9 MPa. The 12 mm diameter rod features an M10x1.25 knuckle thread, and the 21 mm adjustable air cushion helps decelerate the piston smoothly at each end of travel.
This model includes the -S suffix, meaning a built-in magnet is fitted to the piston. This allows CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for non-contact position sensing. Because the 1100 mm stroke exceeds the 1000 mm maximum standard stroke for bore 32, this is a made-to-order configuration. The body length A is 140 mm, giving an approximate total extended length of 1240 mm.
| Model | Airtac SC32 Standard Cylinder SC32X1100S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1100 mm stroke with built-in magnet sensing pushes reject gates or diverts lightweight packages on wide conveyors, with end-of-stroke confirmation via DMSG sensors.
Extends a dispense nozzle across a large panel. The 402 N force at 0.5 MPa is ample for low-resistance positioning, and the adjustable cushion prevents fluid splash at stroke end.
Raises and lowers a light-curtain frame for pallet profiling. The built-in magnet provides home and extended position signals to the safety PLC.
Choose the SC32 for light-duty clamping, sorting, or ejection tasks where its 402 N push at 0.5 MPa is sufficient. If your application requires more force, stepping up to the SC40 provides 628 N at the same pressure. For this 1100 mm stroke, side-load management is critical: the 12 mm rod is slender at full extension and will bend under lateral force. Always use an external linear guide or a guided cylinder to absorb side loads, preventing premature rod bearing and seal wear.
When replacing an existing cylinder, match five points: 32 mm bore, 1100 mm stroke, PT1/8 port thread, the built-in magnet (-S) for sensor compatibility, and the basic mounting configuration. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. These values are based on the 32 mm bore and 12 mm rod diameter.
No. At 1100 mm stroke, the 12 mm rod is highly susceptible to bending and buckling under side loads or high acceleration. An external guide rail or rod-alignment coupler is mandatory to protect the rod bearing and ensure reliable service life.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.