The AirTAC Airtac SC32 Standard Cylinder SC32X110S is a genuine double-acting standard air cylinder with a Ø32mm bore and 110mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X110S is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (563 N at 0.7 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for light automation tasks.
This model includes a built-in magnet, allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly on the barrel for precise end-of-stroke position sensing. The 110 mm stroke fits neatly between the standard 100 and 125 mm options, operating smoothly within the 30-800 mm/s speed range.
| Model | Airtac SC32 Standard Cylinder SC32X110S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 110 mm stroke and magnetic piston make this ideal for diverting or ejecting small components on conveyors where sensor confirmation of each cycle is required.
Compact and lightweight, the SC32X110S suits end-of-arm tooling on small collaborative robots, with the built-in magnet providing closed-loop position feedback.
Delivers a controlled 402 N clamping force at standard shop air pressure, perfect for holding lightweight parts during assembly or laser marking.
For higher force, step up to the SC40 bore which provides 628 N push at 0.5 MPa. For a shorter stroke, the SC32X100 is a standard alternative. When replacing, match bore, stroke, PT port thread, and the -S magnet suffix. This cylinder is not ISO 15552; it is a tie-rod design and is dimensionally shorter, so only a genuine AirTAC SC32 will guarantee identical mounting dimensions.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
Yes. The -S suffix indicates a built-in magnet, so AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors clip directly onto the barrel without any additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.