The AirTAC Airtac SC32 Standard Cylinder SC32X130 is a genuine double-acting standard air cylinder with a Ø32mm bore and 130mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X130 is a double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion make it well-suited for light automation tasks requiring a compact footprint.
With a body length A of 140 mm and a 130 mm stroke, this cylinder fits neatly into machinery where space is limited. The standard PT1/8 ports and M10x1.25 rod thread allow straightforward integration with common pneumatic fittings and rod-end accessories.
| Model | Airtac SC32 Standard Cylinder SC32X130 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Provides 402 N of clamping force at 0.5 MPa for holding lightweight components during assembly, drilling, or gluing operations.
Acts as a compact diverter or stopper on low-speed conveyors, directing small packages or products with a 130 mm stroke reach.
Fits into benchtop diagnostic or liquid-handling equipment, offering reliable double-acting motion for precise sample positioning.
For applications needing slightly more force, consider stepping up to the SC40 series, which offers 628 N of push at 0.5 MPa. When replacing an existing cylinder, ensure a 5-point match: 32 mm bore, 130 mm stroke, PT1/8 port thread, basic mounting (no accessories), and the absence of a built-in magnet. If your load applies side force or the stroke exceeds 300 mm, external guide rails are recommended to protect the 12 mm rod from bending.
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. It is a direct dimensional match only for another AirTAC SC32 tie-rod cylinder with the same stroke and port configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.