The AirTAC Airtac SC32 Standard Cylinder SC32X130S is a genuine double-acting standard air cylinder with a Ø32mm bore and 130mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X130S is a compact double-acting tie-rod cylinder with a 32 mm bore and 130 mm stroke, factory-equipped with a built-in magnet for sensor feedback. At 0.5 MPa it generates 402 N pushing force, making it a capable actuator for light clamping, sorting, and pick-and-place tasks.
This model uses a 12 mm diameter piston rod with M10x1.25 threads and PT1/8 ports. The adjustable air cushion (21 mm length) decelerates the piston smoothly at end-of-travel. The integrated magnet allows CMSG/DMSG/EMSG reed or solid-state sensors to clamp directly onto the barrel for end-of-stroke detection.
| Model | Airtac SC32 Standard Cylinder SC32X130S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Provides 402 N of push force for part ejection, sorting gates, and small-component clamping on automated assembly lines.
Actuates label applicators and carton flap folders where compact size and sensor-ready feedback are essential.
Handles test-tube handling and microplate positioning with clean, filtered air and non-contact magnetic sensing.
Choose the SC32X130S when 402 N push at 0.5 MPa meets your load requirement. If you need more force, step up to the 40 mm bore (628 N at 0.5 MPa). For strokes above 300 mm, consider an external guide or guided cylinder to protect the 12 mm rod from side-load bending. To replace an existing cylinder, match the 32 mm bore, 130 mm stroke, PT1/8 port thread, built-in magnet, and basic mounting configuration.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At the maximum 0.9 MPa, push force reaches 724 N.
Yes. The -S suffix indicates a built-in magnet, so AirTAC CMSG, DMSG, or EMSG sensors can be mounted directly on the barrel for non-contact position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.