The AirTAC Airtac SC32 Standard Cylinder SC32X1350S is a genuine double-acting standard air cylinder with a Ø32mm bore and 1350mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X1350S is a double-acting tie-rod cylinder with a 32 mm bore and an extra-long 1350 mm stroke, built to order beyond the standard 1000 mm maximum. It delivers 402 N of push force at 0.5 MPa and up to 724 N at the 0.9 MPa maximum operating pressure, driven by a 12 mm diameter piston rod with M10x1.25 threads.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing. The 21 mm adjustable air cushion at each end decelerates the piston smoothly, and the PT1/8 port threads connect to standard pneumatic fittings. The body length A is 140 mm, giving a total extended length of approximately 1490 mm.
| Model | Airtac SC32 Standard Cylinder SC32X1350S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 1350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves lightweight components across wide conveyor gaps where a 1350 mm stroke eliminates the need for complex multi-stage actuators.
Operates extended diverters or gates in packaging lines, with the built-in magnet providing end-of-stroke confirmation via DMSG sensors.
Drives long-travel sample trays or optical benches, using the smooth adjustable cushion to prevent vibration at stroke ends.
For applications needing more force, stepping up to the 40 mm bore SC40 series provides 628 N at 0.5 MPa. Because the 1350 mm stroke is well beyond the 300 mm threshold, this long, slender 12 mm rod is susceptible to bending under side loads — always use an external linear guide or rod-alignment coupler to protect the rod bearing and seals. When replacing an existing cylinder, match five points: 32 mm bore, 1350 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic (no bracket) mounting configuration.
Quick checklist
At 0.7 MPa (7 bar), the 32 mm bore generates 563 N of push force. The pull force on the return stroke is 345 N at 0.5 MPa due to the 12 mm rod reducing the piston area.
No. The 12 mm rod is too slender for an unsupported 1350 mm stroke under any side load. An external guide rail or a rod-alignment coupler is required to prevent rod bending, premature bearing wear, and seal failure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.