The AirTAC Airtac SC32 Standard Cylinder SC32X1400S is a genuine double-acting standard air cylinder with a Ø32mm bore and 1400mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X1400S is a double-acting single-rod pneumatic cylinder with a 32 mm bore and an extended 1400 mm stroke, built with a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors. At 0.5 MPa it delivers 402 N push and 345 N pull, rising to 724 N push at the 0.9 MPa maximum operating pressure.
This stroke length exceeds the 1000 mm maximum standard stroke for bore 32, making it a non-standard made-to-order configuration. The 12 mm diameter rod and 21 mm adjustable air cushion help manage end-of-stroke deceleration, though for a stroke this long an external guide is strongly recommended to protect the rod from bending under side load.
| Model | Airtac SC32 Standard Cylinder SC32X1400S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 1400 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1400 mm stroke moves lightweight parts between distant conveyor stations, with the built-in magnet enabling end-of-stroke position sensing.
Operates a long-travel diverter gate in packaging lines, where the compact tie-rod body fits narrow machine frames.
Drives a long linear slide in test equipment, using the adjustable cushion to softly stop delicate samples at each end.
Choose the SC32 when 402 N at 0.5 MPa meets the load requirement; if more force is needed, step up to the SC40 which provides 628 N at the same pressure. For any stroke of 300 mm or more, and especially this 1400 mm non-standard stroke, side loads can cause rod bearing wear or rod bending — use an external linear guide or a guided cylinder to absorb transverse forces.
To replace an existing SC32X1400S, match five points: 32 mm bore, 1400 mm stroke, PT port thread, the built-in magnet (-S) for sensor compatibility, and the basic (no bracket) mounting configuration.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The maximum standard stroke for a 32 mm bore SC cylinder is 1000 mm. The 1400 mm stroke is a non-standard, made-to-order length. An external guide is recommended to prevent rod buckling on such a long stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.