The AirTAC Airtac SC32 Standard Cylinder SC32X1500S is a genuine double-acting standard air cylinder with a Ø32mm bore and 1500mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X1500S is a double-acting single-rod pneumatic cylinder with a 32 mm bore and an extended 1500 mm stroke, which exceeds the standard maximum of 1000 mm for this bore size, making it a non-standard made-to-order configuration. It delivers a push force of 402 N at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for precise position feedback. The cylinder uses a PT1/8 port, an M10x1.25 rod thread, and adjustable air cushioning with a 21 mm cushion length to decelerate the piston smoothly at end of travel.
| Model | Airtac SC32 Standard Cylinder SC32X1500S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 1500 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1500 mm reach is ideal for transferring lightweight parts between distant conveyor lines or workstations in automated assembly cells, with sensor feedback confirming full extension and retraction.
Operates a push-gate or lane diverter on a packaging line from a remote mounting position, where the long stroke eliminates the need for complex linkages.
Used in diagnostic equipment to extend a probe or gripper deep into a temperature-controlled chamber, with the magnetic piston enabling external position verification without additional mechanical switches.
Select the SC32 bore for light to moderate pneumatic tasks where its 402 N push at 0.5 MPa is sufficient. If your application demands more force, step up to the SC40 bore, which provides 628 N at the same pressure. For this 1500 mm stroke, the long, slender 12 mm rod is susceptible to bending under side loads; always use an external linear guide or a guided cylinder configuration to protect the rod bearing and ensure reliable operation.
When replacing an existing cylinder, verify five key points to ensure a direct match: the 32 mm bore, the exact 1500 mm stroke, the PT1/8 port thread, the built-in magnet for sensor compatibility, and the basic mounting style without attached brackets.
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
No. The maximum standard stroke for the SC32 bore is 1000 mm. A 1500 mm stroke is a non-standard, made-to-order configuration, and it requires an external guide to prevent rod buckling under compressive loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.