The AirTAC Airtac SC32 Standard Cylinder SC32X150CA is a genuine double-acting standard air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X150CA is a 32 mm bore, 150 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It produces a push force of 402 N at 0.5 MPa and 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod with an M10x1.25 knuckle thread.
This model is configured with a CA rear single clevis mount (F-SC32CA), allowing the cylinder to pivot during operation for applications with angular movement. The standard PT1/8 port and adjustable air cushion at both ends provide controlled deceleration over the 21 mm cushion length, while the TPU seals ensure reliable performance in standard temperatures from -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X150CA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 402 N push force at 0.5 MPa makes this cylinder ideal for light-duty clamping, holding workpieces, or operating small assembly jigs where a pivoting rear clevis mount simplifies alignment.
With a 150 mm stroke and rear pivot mount, it can actuate diverter gates or sorting flaps on small conveyor lines, handling lightweight packages or components reliably at speeds up to 800 mm/s.
The CA clevis mount allows the cylinder to swing as it opens and closes small hopper doors or chutes, controlling the flow of granules or small parts in packaging and processing equipment.
For applications needing more force, stepping up to the 40 mm bore SC40 series provides 628 N at 0.5 MPa. If a shorter, more compact cylinder is required, the 25 mm stroke variant in this bore can be considered. Always ensure the cylinder is matched on all five key points when replacing an existing unit: bore, stroke, port thread (PT), mounting accessory (CA rear clevis), and magnet option (none on this model).
With a 150 mm stroke on a 12 mm rod, this cylinder is well within standard limits, but any side loading should still be managed with external guides. The SC32 body length A is 140 mm, giving a total extended length of approximately 290 mm.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is shorter in overall length than a comparable ISO 15552 profile cylinder. It is not dimensionally interchangeable with ISO 15552 standards. For a direct replacement, match another AirTAC SC tie-rod cylinder with the same 32 mm bore, 150 mm stroke, PT1/8 ports, and CA rear clevis mount.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.