The AirTAC Airtac SC32 Standard Cylinder SC32X150H is a genuine double-acting standard air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X150H is a compact double-acting tie-rod cylinder with a 32 mm bore and 150 mm stroke, factory-equipped with Viton (FKM) seals for reliable operation in high-temperature environments up to 150 °C. It generates a push force of 402 N at 0.5 MPa and reaches 724 N at its maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod with an M10x1.25 rod thread.
This model features PT1/8 pneumatic ports and a 21 mm adjustable air cushion at each end to decelerate the piston smoothly. The body length A is 140 mm, giving a total extended length of approximately 290 mm. As a genuine AirTAC SC series cylinder, it is a shorter, non-ISO 15552 design that fits where a standard profile barrel would be too long.
| Model | Airtac SC32 Standard Cylinder SC32X150H |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
With Viton seals rated to 150 °C, the SC32X150H operates reliably in autoclave loading, drying ovens, and heated press tooling where standard seals would degrade.
The 150 mm stroke and 402 N push force at 0.5 MPa are well-suited to diverting lightweight components on high-speed packaging or assembly lines.
Compact 140 mm body length and clean double-acting motion make this cylinder a good fit for fluid sampling mechanisms and test-rig actuation in warm environments.
Choose the SC32X150H for light positioning, sorting, and clamping tasks where ambient heat is present. If you need more force at the same pressure, step up to the 40 mm bore (SC40 series), which provides 628 N push at 0.5 MPa. The 12 mm rod is slender; for strokes over 300 mm or any side-load, add an external linear guide to protect the rod bearing from bending stress.
For a correct replacement, match five points: 32 mm bore, 150 mm stroke, PT1/8 ports, the Viton seal designation (H), and the basic mounting style. This cylinder accepts the full range of F-SC32 mounting accessories if your application later requires a pivot or flange.
Quick checklist
At the maximum operating pressure of 0.9 MPa, the push force is 724 N. At the more common 0.5 MPa line pressure, it delivers 402 N pushing and 345 N pulling. The theoretical maximum at 1.0 MPa is 82 kgf, though operation is limited to 1.0 MPa.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder. It is dimensionally interchangeable only with another AirTAC SC32 tie-rod cylinder matching the same bore, stroke, port thread, and mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.