The AirTAC Airtac SC32 Standard Cylinder SC32X150S is a genuine double-acting standard air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X150S is a compact double-acting pneumatic cylinder with a 32 mm bore and 150 mm stroke, pre-fitted with a magnet for barrel-mounted sensors. At a standard 0.5 MPa supply, it generates 402 N extending thrust and 345 N on the retract, making it a capable actuator for light handling and sorting tasks.
This model uses a 12 mm diameter piston rod with M10x1.25 male threads and PT1/8 ports. The adjustable air cushion absorbs 21 mm of travel at each end, protecting end caps during high-cycle operation. The built-in magnet allows direct clamping of CMSG, DMSG, or EMSG reed and solid-state sensors to the tie-rod barrel for reliable end-of-stroke detection.
| Model | Airtac SC32 Standard Cylinder SC32X150S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 150 mm stroke and sensor-ready magnet make this cylinder ideal for light-duty pick-and-place units where mid-stroke position confirmation is required.
Delivers 402 N of push force to reliably actuate small gates or flippers on packaging conveyors, with magnetic sensors confirming open/closed status.
Compact 32 mm bore and clean double-acting motion suit test-tube handling or sample tray indexing in automated lab equipment.
Choose the SC32 bore when your application needs up to 402 N of push force at 0.5 MPa. If you require a higher force margin, step up to the SC40, which provides 628 N at the same pressure. For strokes of 150 mm, the 12 mm rod is well supported within the 1000 mm maximum standard stroke for this bore.
To ensure a correct replacement, match five key points: bore (32 mm), stroke (150 mm), PT1/8 port thread, the built-in magnet (-S suffix), and the basic mounting style. This cylinder is a direct dimensional match for an existing AirTAC SC32X150S only; it is not an ISO 15552 interchangeable profile.
Quick checklist
At 0.5 MPa, the extending force is 402 N and the retracting force is 345 N. At the maximum operating pressure of 0.9 MPa, the extending thrust reaches 724 N.
Yes. The -S suffix indicates a built-in magnet, allowing you to clamp CMSG, DMSG, or EMSG sensors directly onto the tie-rod barrel to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.