The AirTAC SC32 Standard Cylinder SC32X150SFA is a genuine double-acting standard air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X150SFA is a double-acting single-rod pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for the 150 mm stroke, making it a compact workhorse for light automation tasks.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors, and the FA front rectangular flange (F-SC32FA) for secure panel mounting on the rod side. The body length A is 140 mm, giving a total extended length of approximately 290 mm.
| Model | Airtac SC32 Standard Cylinder SC32X150SFA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 150 mm stroke and 402 N push force at 0.5 MPa reliably eject light plastic or metal parts from assembly nests, with the built-in magnet enabling end-of-stroke sensing for cycle confirmation.
Operates a small diverter gate on a conveyor line. The FA front flange allows the cylinder to be rigidly mounted to the conveyor frame, while the 12 mm rod withstands frequent cycling.
Provides precise, repeatable linear positioning for test tube racks or pipette tips. The adjustable cushion ensures gentle handling, and the magnetic piston allows for multi-position sensing along the 150 mm stroke.
For applications needing more force, step up to the SC40 bore which provides 628 N at 0.5 MPa. If a shorter, lighter cylinder is sufficient, the SC32 at a 100 mm or 125 mm stroke reduces the extended length. The FA front flange is ideal when the cylinder body must be fixed to a bulkhead with the rod passing through.
When replacing, match five key points: 32 mm bore, 150 mm stroke, PT1/8 port thread, FA front flange mounting, and the -S magnet for sensor compatibility. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to another AirTAC SC32 or an equivalent tie-rod design.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes. The -S suffix in the model code means it has a built-in magnet in the piston. This allows you to clamp AirTAC CMSG, DMSG, or EMSG reed and solid-state sensors directly onto the cylinder barrel to detect piston position without any additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.