The AirTAC Airtac SC32 Standard Cylinder SC32X150SLB is a genuine double-acting standard air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X150SLB is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa), making it a compact workhorse for light automation tasks. Its 12 mm piston rod and 21 mm adjustable air cushion provide smooth deceleration at each end of the 150 mm stroke.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, plus an LB foot mount (F-SC32LB) for stable axial surface installation. The tie-rod construction keeps the body length to just 140 mm, contributing to a total extended length of approximately 290 mm.
| Model | Airtac SC32 Standard Cylinder SC32X150SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 150 mm stroke and 402 N push force efficiently divert lightweight packages on conveyor lines, with the LB mount providing rigid, aligned actuation.
Delivers controlled clamping force for delicate electronic or plastic components, using the adjustable cushion to prevent impact damage.
Compact 32 mm bore and sensor-ready magnet suit automated test equipment where position feedback and a small footprint are required.
Choose the SC32 bore for light push/pull tasks up to 724 N. If your load approaches 1000 N, step up to the SC40 (628 N at 0.5 MPa) for added headroom. For strokes over 300 mm on this 12 mm rod, consider an external guide to prevent rod buckling under side load.
To replace an existing cylinder, match five points: 32 mm bore, 150 mm stroke, PT1/8 port thread, LB foot mount (F-SC32LB), and the -S magnet for sensor compatibility. This tie-rod design is shorter than ISO 15552 cylinders and is not dimensionally interchangeable with them.
Quick checklist
At 0.7 MPa operating pressure, the push force is 563 N. The maximum push force at 0.9 MPa is 724 N. The theoretical pull force at 0.5 MPa is 345 N.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length (140 mm body for 32 mm bore) than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. Only replace with another AirTAC SC32 cylinder matching the stroke, port, and mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.