The AirTAC Airtac SC32 Standard Cylinder SC32X150SN is a genuine double-acting standard air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X150SN is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa and up to 724 N at the 0.9 MPa maximum operating pressure. Its 12 mm diameter piston rod and 21 mm adjustable air cushion are sized for light automation tasks, making this 150 mm stroke unit a precise fit for short-transfer and sorting stations.
This model is factory-equipped with a built-in magnet (suffix -S) so CMSG/DMSG/EMSG sensors can be clamped directly onto the barrel for non-contact position sensing. The NBR seal variant (suffix -N) provides reliable sealing with standard PT ports, and the body length A of 140 mm keeps the overall envelope compact.
| Model | Airtac SC32 Standard Cylinder SC32X150SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 150 mm stroke and built-in magnet for sensor feedback make this cylinder ideal for diverting small components on compact conveyor lines.
Delivers 402 N of push force at standard shop air, sufficient for the vertical Z-axis of a lightweight pick-and-place head handling electronic parts.
NBR seals and a clean 32 mm bore suit reagent dispensing or vial capping stations where a reliable 150 mm linear stroke is required.
Choose the SC32 for light-duty push/pull tasks up to 724 N. If your application needs more force, step up to the SC40 which provides 628 N at 0.5 MPa. For this 150 mm stroke, rod bearing loads are moderate, but always align the load axially to prevent side-load bending on the 12 mm rod. When replacing an existing cylinder, match five points: 32 mm bore, 150 mm stroke, PT port thread, the built-in magnet (-S), and the NBR seal material.
Quick checklist
At 0.7 MPa supply pressure the SC32X150SN generates 563 N of push force. The pull force at the same pressure is lower due to the rod area, delivering 345 N at 0.5 MPa.
Yes. The -S suffix indicates a built-in magnet, allowing you to mount CMSG (reed) or DMSG/EMSG (solid-state) sensors directly on the barrel to detect piston position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.