The AirTAC Airtac SC32 Standard Cylinder SC32X150STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X150STC is a double-acting single-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 150 mm stroke suits medium-reach clamping, sorting, and material-transfer tasks, with a 12 mm diameter rod and a 21 mm adjustable air cushion at each end to soften end-of-stroke impact.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, plus a centre trunnion (TC) mount with the TCM1 bracket (F-SC32TC) for pivoting applications. The body length A is 140 mm, making the extended length approximately 290 mm. Operating range is -20 to +70 °C with TPU seals and standard PT ports.
| Model | Airtac SC32 Standard Cylinder SC32X150STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 150 mm stroke and trunnion pivot allow this cylinder to actuate diverter gates on compact conveyor lines, handling 402 N push force at standard plant pressure.
Ideal for jigs and fixtures requiring consistent 724 N clamping force at 0.9 MPa, with magnetic sensors confirming clamp position before a machining cycle starts.
The centre trunnion mount enables the cylinder body to swing, making it suitable for actuating levers or linkages in packaging machinery without rod binding.
Choose the SC32 bore when your application needs up to 402 N push at 0.5 MPa. If you require more force, step up to the SC40 bore, which provides 628 N at the same pressure. For strokes of 300 mm or longer, evaluate side-load conditions carefully—an unsupported 12 mm rod can bend under lateral force; consider an external linear guide or a guided cylinder. To ensure a drop-in replacement, match five points: 32 mm bore, 150 mm stroke, PT port thread, centre trunnion (TC) mounting, and the built-in magnet (-S) for sensor compatibility.
Quick checklist
At 0.5 MPa the push force is 402 N and pull force is 345 N. At the maximum operating pressure of 0.9 MPa, push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes, if the original is a 32 mm bore, 150 mm stroke tie-rod cylinder with a centre trunnion mount, PT ports, and a magnetic piston. The SC32X150STC ships with the TCM1 bracket (F-SC32TC) and a built-in magnet for sensor mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.