Airtac SC32 Standard Cylinder SC32X15S
The AirTAC Airtac SC32 Standard Cylinder SC32X15S is a genuine double-acting standard air cylinder with a Ø32mm bore and 15mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke15 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X15S
The AirTAC SC32X15S is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). With a 15 mm stroke and a 12 mm diameter piston rod, it is built for short, precise linear movements in automated assembly fixtures.
This model includes the -S suffix, indicating a built-in magnet embedded in the piston. This allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for reliable end-of-stroke detection without external brackets.
Airtac SC32 Standard Cylinder SC32X15S Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X15S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X15S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X15S Is Used
Part Ejection
Short 15 mm stroke ejects small components from injection molds or stamping dies, with the built-in magnet providing cycle confirmation to the PLC.
Diverter Gates
Actuates miniature diverter gates on conveyor lines. The compact 140 mm body length plus stroke fits easily into tight packaging machine layouts.
Lab Automation
Pipette tip loading or vial capping in laboratory automation where a clean, short-throw actuator with sensor feedback is required.
Is the Airtac SC32 Standard Cylinder SC32X15S the Right Cylinder?
For applications requiring more force, consider stepping up to the 40 mm bore SC40 series, which provides 628 N of push force at 0.5 MPa. The SC32X15S is a standard-stroke model well within the 1000 mm maximum for this bore size. When replacing an existing cylinder, match the 32 mm bore, 15 mm stroke, PT1/8 port thread, and ensure the replacement also carries the -S magnet option for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X15S FAQ
At the standard operating pressure of 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, push force increases to 724 N.
Yes. The -S suffix denotes a built-in magnet, making this cylinder fully compatible with AirTAC CMSG, DMSG, and EMSG series solid-state and reed sensors that clamp directly onto the tie-rod barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X15S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.