The AirTAC Airtac SC32 Standard Cylinder SC32X160S is a genuine double-acting standard air cylinder with a Ø32mm bore and 160mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X160S is a compact double-acting tie-rod cylinder with a 32 mm bore and 160 mm stroke, delivering a push force of 402 N at 0.5 MPa (up to 724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide smooth deceleration for light automation tasks.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for reliable end-of-stroke position sensing. The body length A is 140 mm, resulting in a total extended length of approximately 300 mm, making it a space-efficient choice for fixture and handling applications.
| Model | Airtac SC32 Standard Cylinder SC32X160S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 160 mm stroke and built-in magnet for sensor feedback make this cylinder ideal for compact pick-and-place mechanisms on assembly lines, where precise end-of-stroke detection is required.
Use the SC32X160S to actuate small diverter gates on conveyor systems. The 402 N push force at 0.5 MPa easily handles lightweight product sorting and lane changing.
Suitable for test-tube handling or sample preparation equipment, this cylinder provides clean, oil-free operation with filtered air and reliable magnetic sensor feedback for process control.
Select the SC32X160S for light-duty pushing, clamping, or sorting where the 402 N push force at 0.5 MPa is sufficient. If your application needs more force, step up to the SC40 bore (628 N push at 0.5 MPa). For strokes of 300 mm or more on a 32 mm bore, consider an external guide or guided cylinder to protect the 12 mm rod from bending under side load.
When replacing an existing cylinder, match five key points: bore (32 mm), stroke (160 mm), PT1/8 port thread, the built-in magnet (-S) for sensor compatibility, and the basic mounting style. This SC cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes. The -S suffix in the model code SC32X160S indicates a built-in magnet on the piston. This allows you to clamp compatible AirTAC CMSG, DMSG, or EMSG sensors directly onto the barrel to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.