The AirTAC Airtac SC32 Standard Cylinder SC32X160SN is a genuine double-acting standard air cylinder with a Ø32mm bore and 160mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X160SN is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (563 N at 0.7 MPa). With a 12 mm piston rod and M10x1.25 rod thread, it suits light automation tasks where space is limited.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors, enabling precise end-of-stroke detection. The NBR seal (-N suffix) provides reliable sealing for standard industrial air, and the PT1/8 port thread keeps connections simple.
| Model | Airtac SC32 Standard Cylinder SC32X160SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 160 mm stroke and 402 N force at 0.5 MPa efficiently eject lightweight plastic or metal parts from small assembly fixtures.
Operates small diverter gates on compact conveyor lines, with sensor feedback confirming open/closed status.
NBR seals and precise sensor positioning make this cylinder suitable for fluid handling or test equipment in laboratory environments.
Choose the SC32 when you need a lightweight actuator with a 32 mm bore. If your force requirement exceeds 563 N at 0.7 MPa, step up to the SC40, which provides 628 N of push force at 0.5 MPa. For strokes over 300 mm, consider an external guide to protect the 12 mm rod from side loads. When replacing this cylinder, match five points: 32 mm bore, 160 mm stroke, PT port thread, the built-in magnet, and the NBR seal material.
Quick checklist
At 0.5 MPa (5 bar), it produces 402 N pushing and 345 N pulling. At the maximum operating pressure of 0.9 MPa, the pushing force increases to 724 N.
Yes. The -S suffix indicates a built-in magnet, allowing AirTAC CMSG, DMSG, or EMSG sensors to be clamped directly onto the barrel for non-contact position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.