The AirTAC Airtac SC32 Standard Cylinder SC32X160STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 160mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X160STC is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 32 mm bore and 160 mm stroke suit compact linear actuation where space is tight but reliable performance is essential.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, plus a centre trunnion (TC) mount with the TCM1 bracket for pivoting applications. The 12 mm diameter piston rod and 21 mm adjustable air cushion ensure smooth deceleration at each end of the stroke.
| Model | Airtac SC32 Standard Cylinder SC32X160STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Ideal for compact diverters and sorting gates on conveyors, where the 402 N push force at 0.5 MPa actuates lightweight flaps reliably. The centre trunnion mount allows the cylinder body to pivot as it strokes.
Provides consistent, controlled clamping for small components in automated assembly jigs. The built-in magnet enables end-of-stroke sensing to confirm the part is secured before the next operation.
Suited for precise linear movements in test and measurement equipment. The adjustable cushion protects delicate mechanisms from impact shock, and the 12 mm rod is sized for light guided loads.
For higher force, step up to the 40 mm bore SC40 series (628 N at 0.5 MPa). For lighter, more compact needs, this 32 mm bore is the smallest in the SC tie-rod range. Always match replacement cylinders on all five key points: bore, stroke, PT port thread, centre trunnion mounting (F-SC32TC), and the built-in magnet for sensor compatibility. The 160 mm stroke is well within the 1000 mm maximum standard stroke for this bore, so side-load risk is low, but always align the rod axially to prevent bending.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is physically shorter than an ISO 15552 cylinder of the same bore and stroke, so it is not dimensionally interchangeable. You must replace it with another AirTAC SC32 tie-rod cylinder matching the 160 mm stroke, PT ports, centre trunnion mount, and built-in magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.