The AirTAC Airtac SC32 Standard Cylinder SC32X160TC is a genuine double-acting standard air cylinder with a Ø32mm bore and 160mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X160TC is a compact double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (563 N at 0.7 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion make it a precise actuator for light automation tasks requiring a 160 mm stroke.
This model ships with the TC centre trunnion mounting bracket (F-SC32TC + TCM1), allowing the cylinder to pivot during operation—ideal for swinging or articulating loads. The body length A is 140 mm, giving an extended length of approximately 300 mm. Standard PT ports (PT1/8) and TPU seals (-20 to +70 °C) are fitted.
| Model | Airtac SC32 Standard Cylinder SC32X160TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 160 mm stroke and trunnion pivot mount allow the cylinder to swing a diverter gate on a packaging conveyor, routing products between lanes with smooth cushion deceleration.
Delivers 402 N at 0.5 MPa for light-duty workpiece clamping on drill jigs or assembly pallets. The trunnion mount lets the cylinder body self-align as the clamp engages.
Ideal for pushing or pulling a pivoting linkage arm in textile or printing machinery. The adjustable cushion absorbs impact energy at both stroke ends, reducing wear on the 12 mm rod.
Choose the SC32 bore for push forces up to 402 N at 0.5 MPa. If your load requires more force, step up to the SC40 bore (628 N at 0.5 MPa). For strokes over 300 mm, consider an external guide to protect the 12 mm rod from side-load bending.
For a direct replacement, match five points: 32 mm bore, 160 mm stroke, PT1/8 port thread, TC centre trunnion mount (F-SC32TC), and no magnet. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa it provides 402 N pushing and 345 N pulling. At the maximum operating pressure of 0.9 MPa, push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The SC32 is a tie-rod cylinder and is shorter than an ISO 15552 cylinder, so mounting dimensions differ. It directly replaces another AirTAC SC32 tie-rod cylinder with matching bore, stroke, PT ports, and TC trunnion mount.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.