verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC32 Standard Cylinder SC32X170H

The AirTAC SC32 Standard Cylinder SC32X170H is a genuine double-acting standard air cylinder with a Ø32mm bore and 170mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ32 mm
  • Stroke170 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 21 mm
$48.35 $55.85Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SC32 stroke, mounting and version on one page All SC32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SC32 Standard Cylinder SC32X170H

The AirTAC SC32X170H is a double-acting tie-rod cylinder equipped with high-temperature Viton (FKM) seals, extending its operating range from 0 to +150 °C for demanding thermal environments. With a 32 mm bore and 170 mm stroke, it delivers a theoretical push force of 724 N at the maximum operating pressure of 0.9 MPa.

This model features a 12 mm piston rod with an M10x1.25 thread and a 21 mm adjustable air cushion to decelerate the load smoothly at stroke end. The compact body length A is 140 mm, resulting in a total extended length of approximately 310 mm. PT1/8 ports are standard.

Airtac SC32 Standard Cylinder SC32X170H Technical Specifications

ModelAirtac SC32 Standard Cylinder SC32X170H
SeriesSC standard tie-rod cylinder
Bore sizeØ32 mm
Stroke170 mm
Acting typeDouble acting
Port sizePT1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N—
Max (approx.)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC32 Standard Cylinder SC32X170H

SCStandard tie-rod cylinder series.
32Bore size in mm.
×170Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC32 Standard Cylinder SC32X170H Is Used

biotech

Autoclave & Sterilization

Viton seals withstand repeated high-temperature sterilization cycles, making this cylinder suitable for autoclave doors and medical device processing equipment.

precision_manufacturing

Hot Press Actuation

Reliable actuation in heated platen presses for laminating or composite curing, where ambient temperatures exceed standard seal limits.

local_fire_department

Foundry & Kiln Gates

Operates reliably near furnaces and kilns to actuate small damper gates or material diverters in high-ambient-heat environments.

Is the Airtac SC32 Standard Cylinder SC32X170H the Right Cylinder?

Choose the SC32X170H for applications requiring heat resistance up to 150 °C. If your force requirement is higher at standard temperatures, stepping up to the 40 mm bore provides 628 N of push force at 0.5 MPa. For strokes of 300 mm or more, evaluate side loads carefully; a long, unsupported 12 mm rod can bend under lateral stress, and an external guide or guided cylinder is recommended. For a direct replacement, match the 32 mm bore, 170 mm stroke, PT port thread, and Viton seal material.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC32 Standard Cylinder SC32X170H FAQ

At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the theoretical push force reaches 724 N.

No. The SC32X170H is a double-acting cylinder and will drift or drop if pressure is exhausted. To hold a position safely without live pressure, you must add a pilot-operated check valve or an external mechanical rod lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC32 Standard Cylinder SC32X170H

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SC32X170H and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.