verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC32 Standard Cylinder SC32X175SH

The AirTAC SC32 Standard Cylinder SC32X175SH is a genuine double-acting standard air cylinder with a Ø32mm bore and 175mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ32 mm
  • Stroke175 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 21 mm
$51.14 $58.64Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SC32 stroke, mounting and version on one page All SC32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SC32 Standard Cylinder SC32X175SH

The AirTAC SC32X175SH is a double-acting single-rod tie-rod cylinder with a 32 mm bore and 175 mm stroke, delivering 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa. This model includes a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors and Viton (FKM) seals, extending the operating temperature range to 0–150 °C for hot or aggressive environments.

With a 12 mm diameter rod and M10x1.25 rod thread, the SC32X175SH has a body length A of 140 mm and a 21 mm adjustable air cushion at each end. The PT1/8 port and PT thread interface make it a direct fit for standard pneumatic circuits. This genuine AirTAC cylinder is ideal for high-temperature automation tasks requiring sensor feedback.

Airtac SC32 Standard Cylinder SC32X175SH Technical Specifications

ModelAirtac SC32 Standard Cylinder SC32X175SH
SeriesSC standard tie-rod cylinder
Bore sizeØ32 mm
Stroke175 mm
Acting typeDouble acting
Port sizePT1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N—
Max (approx.)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC32 Standard Cylinder SC32X175SH

SCStandard tie-rod cylinder series.
32Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC32 Standard Cylinder SC32X175SH Is Used

biotech

Hot-Zone Actuation

Operating a small gate or diverter inside an industrial oven or autoclave where ambient temperatures exceed 70 °C, using the Viton seals and sensor feedback.

precision_manufacturing

Heated Press Feed

Pushing parts into a heated platen press with a 175 mm stroke. The magnet confirms full extension before the press cycle starts.

conveyor_belt

High-Temp Sorting

Actuating a sorting gate on a conveyor carrying hot-melt or warm products, withstanding the radiant heat thanks to the FKM seals.

Is the Airtac SC32 Standard Cylinder SC32X175SH the Right Cylinder?

Choose the SC32X175SH when your application needs a compact 32 mm bore with 175 mm of stroke and the ability to operate in elevated temperatures up to 150 °C. The built-in magnet allows for easy integration of reed or solid-state sensors to confirm piston position. If your force requirement is higher, stepping up to the 40 mm bore provides 628 N at 0.5 MPa. For strokes over 300 mm on a 12 mm rod, consider an external guide to prevent rod bending under side loads. To ensure a correct replacement, match the bore, stroke, PT port thread, magnet option, and Viton seal material.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC32 Standard Cylinder SC32X175SH FAQ

At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.

Yes, the -S suffix indicates a built-in magnet, making it compatible with AirTAC CMSG, DMSG, and EMSG series reed and solid-state sensors that clamp directly onto the cylinder barrel.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC32 Standard Cylinder SC32X175SH

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SC32X175SH and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.