The AirTAC Airtac SC32 Standard Cylinder SC32X175SLB is a genuine double-acting standard air cylinder with a Ø32mm bore and 175mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X175SLB is a compact double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 32 mm bore and 175 mm stroke suit light-duty linear tasks where space is tight.
This model includes a built-in magnet (suffix -S) for mounting CMSG/DMSG/EMSG sensors directly on the barrel, plus an LB foot mount (F-SC32LB) for secure axial surface installation. The 12 mm rod, PT1/8 ports, and 21 mm adjustable cushion provide reliable, end-of-stroke deceleration.
| Model | Airtac SC32 Standard Cylinder SC32X175SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The built-in magnet allows CMSG/DMSG sensors to confirm end-of-stroke position, perfect for diverting small packages on conveyors.
Provides 402 N of clamping force for holding small parts during assembly, gluing, or light machining operations.
Compact 32 mm bore and clean double-acting motion suit test stands and lab automation where repeatable linear force is needed.
Choose the SC32X175SLB for sensor-equipped, light-force applications up to 724 N. If you need more force, step up to the 40 mm bore (628 N at 0.5 MPa). For a direct replacement, match the 32 mm bore, 175 mm stroke, PT1/8 ports, LB foot mount, and the -S magnet option.
At 175 mm stroke, side loads are minimal, but always align the rod axially. For strokes over 300 mm, consider an external guide to protect the 12 mm rod from bending.
Quick checklist
At 0.5 MPa, it delivers 402 N pushing and 345 N pulling. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
Yes. The -S suffix denotes a built-in magnet, allowing AirTAC CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the tie-rod barrel for end-of-stroke detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.