The AirTAC Airtac SC32 Standard Cylinder SC32X180 is a genuine double-acting standard air cylinder with a Ø32mm bore and 180mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X180 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm piston rod and 21 mm adjustable air cushion make it well-suited for light clamping, sorting, and assembly tasks requiring a short, precise stroke.
With a body length A of 140 mm, the total extended length is approximately 320 mm. This model features the standard PT1/8 port and M10x1.25 rod thread, offering a reliable pneumatic solution for general industrial automation where space is limited.
| Model | Airtac SC32 Standard Cylinder SC32X180 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 402 N push force at 0.5 MPa is ideal for light-duty clamping fixtures in electronics or small-component assembly, holding parts securely without damage.
With a 180 mm stroke, this cylinder effectively actuates small diverter gates on compact conveyor systems, sorting lightweight packages or components.
The clean, compact design and adjustable cushioning suit repetitive pick-and-place or test-tube handling mechanisms in laboratory automation equipment.
For applications needing more force, consider stepping up to the SC40 bore, which provides 628 N at 0.5 MPa. If a 32 mm bore is correct but the stroke is too short, the SC32 family supports standard strokes up to 500 mm. Always ensure the 12 mm rod is not subjected to high side loads; for strokes over 300 mm or any side-loading condition, an external guide or guided cylinder is recommended to prevent rod bending.
When replacing an existing cylinder, match five key points: bore (32 mm), stroke (180 mm), port thread (PT1/8), mounting accessory (basic), and magnet option (none). This ensures a direct dimensional and performance swap.
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
This specific model (SC32X180) does not include the -S magnet option, so a standard reed or solid-state sensor cannot be directly mounted on the barrel. For sensor compatibility, order the SC32X180-S variant, which includes a built-in magnet for use with CMSG/DMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.