The AirTAC Airtac SC32 Standard Cylinder SC32X190S is a genuine double-acting standard air cylinder with a Ø32mm bore and 190mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X190S is a double-acting single-rod pneumatic cylinder with a 32 mm bore and 190 mm stroke, delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm diameter rod and M10x1.25 rod thread suit light to medium automation tasks where a compact tie-rod body is preferred.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the barrel for non-contact position sensing. The adjustable air cushion at each end (21 mm cushion length) decelerates the piston smoothly, and the body length A of 140 mm keeps the overall envelope short.
| Model | Airtac SC32 Standard Cylinder SC32X190S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 190 mm stroke and 402 N push force reliably eject lightweight plastic or metal parts from assembly nests and pick-and-place fixtures.
Operates small diverter gates on compact conveyor lines. The built-in magnet provides end-of-stroke confirmation via CMSG/DMSG sensors.
Applies consistent, low-force clamping for test tubes or vials in laboratory automation equipment, with sensor feedback for cycle verification.
For applications needing more force, the SC40 series steps up to 628 N push at 0.5 MPa with a 16 mm rod. The SC32X190S matches any AirTAC SC32 tie-rod cylinder with the same bore, stroke, PT1/8 port thread, basic mounting, and magnet option. When replacing, verify the port thread (PT standard), the 190 mm stroke, and the magnet sensor requirement.
At 190 mm stroke, the 12 mm rod is well supported within standard limits. For strokes approaching the 1000 mm maximum, consider an external guide or a guided cylinder to protect the rod from bending under side load.
Quick checklist
At 0.7 MPa supply pressure, the push force is 563 N and the pull force is approximately 483 N (retracting side has a reduced piston area due to the 12 mm rod). The maximum push force at 0.9 MPa is 724 N.
Yes. The -S suffix indicates a built-in magnet, so CMSG (reed) and DMSG/EMSG (solid-state) sensors mount directly on the barrel. Without the -S magnet option, the standard SC cylinder body is not compatible with these external sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.