The AirTAC Airtac SC32 Standard Cylinder SC32X2000 is a genuine double-acting standard air cylinder with a Ø32mm bore and 2000mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X2000 is a double-acting tie-rod cylinder with a 32 mm bore and an extended 2000 mm stroke, produced as a non-standard made-to-order length. With a 12 mm piston rod and M10x1.25 rod thread, it generates 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa.
This model features a compact body length A of just 140 mm and 21 mm of adjustable air cushion at each end to decelerate the piston. The PT1/8 ports supply filtered air, and the standard TPU seals suit ambient temperatures from -20 to +70 °C. For strokes of this length, external guide rails or a guided cylinder are strongly recommended to protect the rod from bending under side loads.
| Model | Airtac SC32 Standard Cylinder SC32X2000 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 2000 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×2000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 2000 mm stroke pushes lightweight bins or trays across wide conveyor gaps where a compact body is needed, with the 12 mm rod providing adequate reach for low-friction linear slides.
Operates a long-travel diverter gate in packaging lines. The adjustable cushion at each end prevents hard stops, preserving gate alignment over millions of cycles.
Ideal for pushing small totes off shelving in automated retrieval systems. The 724 N maximum force at 0.9 MPa handles light payloads without overstressing the slender rod.
Choose the SC32 bore for light pneumatic tasks needing up to 402 N at 0.5 MPa. If your load approaches this limit, stepping up to the SC40 bore raises push force to 628 N at the same pressure. For any stroke of 300 mm or more—and especially a 2000 mm stroke—the unsupported rod is vulnerable to side-load bending; always add an external linear guide or select a guided cylinder variant to ensure reliable operation.
When replacing an existing cylinder, match five points: 32 mm bore, 2000 mm stroke, PT1/8 port thread, basic (no bracket) mounting, and no magnet. This ensures the new SC32X2000 drops into the same mounting envelope as the original AirTAC SC tie-rod unit.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force rises to 724 N. These values assume a clean, filtered air supply at the PT1/8 port.
No, the maximum standard stroke for the 32 mm bore is 1000 mm, so 2000 mm is a non-standard made-to-order length. For any stroke over 300 mm, and critically at 2000 mm, you must use an external guide or a guided cylinder to prevent the 12 mm rod from bending under side load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.