The AirTAC Airtac SC32 Standard Cylinder SC32X200SLB is a genuine double-acting standard air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X200SLB is a double-acting tie-rod cylinder with a 32 mm bore and 200 mm stroke, delivering a push force of 402 N at 0.5 MPa (up to 724 N at the 0.9 MPa maximum operating pressure). The 12 mm diameter piston rod provides a solid connection for light automation tasks, and the 21 mm adjustable air cushion at each end decelerates the piston smoothly to reduce end-of-stroke impact.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing. The LB foot mounting (accessory F-SC32LB) provides stable axial support for surface-mounted installations. Seals are standard TPU, rated for -20 to +70 °C, with PT threaded ports.
| Model | Airtac SC32 Standard Cylinder SC32X200SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 200 mm stroke and 402 N push force at 0.5 MPa are ideal for diverting gates and pushers on compact conveyor lines handling small packages or components.
With a 12 mm rod and built-in magnet for end-of-stroke sensing, this cylinder suits light-duty pick-and-place arms requiring precise position confirmation in assembly cells.
The smooth, adjustable cushioning and 200 mm reach make it a reliable actuator for tamp-blow label applicators, ensuring consistent label placement without damaging the product.
For applications needing more force, stepping up to the 40 mm bore SC40 series provides 628 N of push force at 0.5 MPa. If a lighter, more compact cylinder is acceptable, the SC32 is the smallest standard SC bore. This 200 mm stroke is well within the 1000 mm maximum standard stroke for the 32 mm bore, so no special stroke considerations apply.
To ensure a direct replacement, match five key points: 32 mm bore, 200 mm stroke, PT port thread, the LB foot mounting accessory, and the built-in magnet for sensor compatibility. The SC is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC tie-rod cylinders with the same configuration.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes. The -S suffix in the model code indicates a built-in magnet is installed on the piston. This allows you to clamp compatible CMSG, DMSG, or EMSG sensors directly onto the cylinder barrel's tie-rod slots to detect piston position without any additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.