The AirTAC Airtac SC32 Standard Cylinder SC32X200SN is a genuine double-acting standard air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X200SN is a double-acting single-rod pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide smooth deceleration for the 200 mm stroke, making it a precise actuator for light automation.
This model includes a built-in magnet (S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling reliable end-of-stroke detection. The NBR (nitrile) seals and standard PT1/8 port thread suit general industrial air supply within a -20 to +70 °C operating range.
| Model | Airtac SC32 Standard Cylinder SC32X200SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 200 mm stroke and 12 mm rod actuate diverter gates on compact conveyor lines, with the built-in magnet confirming gate position via a CMSG sensor.
Delivers 724 N at 0.9 MPa for pressing small bushings or connectors, where NBR seals handle shop air and the adjustable cushion prevents impact damage.
Used in diagnostic equipment for precise linear transfer, the sensor-ready magnet enables closed-loop feedback for pick-and-place of sample trays.
Choose the SC32 for compact force requirements up to 724 N at 0.9 MPa. If your load demands more power, step up to the SC40 which provides 628 N at 0.5 MPa. This 200 mm stroke is within the 1000 mm maximum standard stroke for the 32 mm bore.
For replacement, match five key points: 32 mm bore, 200 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic (no bracket) mounting. This tie-rod cylinder is shorter than an ISO 15552 profile and is not a dimensional interchange.
Quick checklist
At 0.5 MPa it produces 402 N extending; at 0.7 MPa it reaches 563 N, and at the maximum operating pressure of 0.9 MPa it delivers 724 N. The theoretical pull force at 0.5 MPa is 345 N.
Yes. The 'S' in the model code indicates a built-in magnet on the piston, allowing AirTAC CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for contactless position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.