The AirTAC Airtac SC32 Standard Cylinder SC32X200STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X200STC is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 200 mm stroke is well within the 1000 mm maximum standard stroke for the 32 mm bore, making it a balanced choice for medium-reach linear tasks.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, plus a centre trunnion (TC) mount with the TCM1 bracket for pivoting applications. The 12 mm rod and PT1/8 ports keep the package compact, while the 21 mm adjustable air cushion protects end-of-stroke components.
| Model | Airtac SC32 Standard Cylinder SC32X200STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 200 mm stroke and trunnion pivot suit diverters or gates on compact conveyors, where the cylinder body needs to swing slightly during actuation.
With 724 N of force at 0.9 MPa, this cylinder provides consistent clamping for light machining or assembly fixtures, with sensor confirmation of jaw position.
The compact 32 mm bore and clean double-acting operation fit sample handling or test rigs, where the magnet allows end-of-stroke sensing in automated sequences.
For higher force, step up to the 40 mm bore (628 N at 0.5 MPa). If space is tight, the 32 mm bore’s 140 mm body length plus 200 mm stroke gives a total extended length of 340 mm. The centre trunnion mount allows the cylinder body to pivot, accommodating angular movement in the load path.
When replacing, match bore (32 mm), stroke (200 mm), PT1/8 port thread, TC centre trunnion mount (F-SC32TC), and the built-in magnet for sensor compatibility. For strokes over 300 mm, consider an external guide to protect the 12 mm rod from side-load bending.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 cylinder of the same bore and stroke, so it is not dimensionally interchangeable. Replace only with another AirTAC SC32 tie-rod cylinder matching the stroke, port, TC mount, and magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.