The AirTAC Airtac SC32 Standard Cylinder SC32X210 is a genuine double-acting standard air cylinder with a Ø32mm bore and 210mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X210 is a compact double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa, suitable for light automation tasks. Its 12 mm piston rod and 21 mm adjustable air cushion provide smooth deceleration at end-of-stroke, while the 140 mm body length keeps the footprint small.
With a 210 mm stroke, this model handles medium-reach material handling and clamping operations. The PT1/8 port and M10x1.25 rod thread offer standard connectivity, and the tie-rod construction allows straightforward maintenance when required.
| Model | Airtac SC32 Standard Cylinder SC32X210 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Provides the 402 N push force needed to eject lightweight plastic or metal components from assembly fixtures, with the 210 mm stroke clearing the tooling area.
Operates a small diverter gate on a conveyor line, using the full 210 mm travel to swing the gate between lanes for product sorting.
Applies consistent pressure for label or sticker application, where the adjustable cushion prevents impact marks on delicate surfaces at the end of the 210 mm stroke.
For higher force requirements, step up to the SC40 bore which provides 628 N at 0.5 MPa. This 32 mm bore model is ideal where space is constrained but a stroke beyond 200 mm is needed. When replacing an existing unit, match bore, stroke, PT port thread, and the basic mounting configuration exactly.
At 210 mm stroke, the 12 mm rod remains well-supported within standard design limits. If the application involves any side load, use an external linear guide to protect the rod bearing from premature wear.
Quick checklist
At the standard operating pressure of 0.5 MPa, the SC32X210 produces 402 N of push force on extension and 345 N of pull force on retraction. At the maximum operating pressure of 0.9 MPa, push force increases to 724 N.
No. The SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. For a correct drop-in replacement, match another AirTAC SC tie-rod cylinder with identical 32 mm bore, 210 mm stroke, PT1/8 ports, and basic mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.