The AirTAC Airtac SC32 Standard Cylinder SC32X210S is a genuine double-acting standard air cylinder with a Ø32mm bore and 210mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X210S is a double-acting pneumatic cylinder with a 32 mm bore and a non-standard 210 mm stroke, extending beyond the standard 1000 mm maximum for this body size. It delivers a push force of 402 N at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for contactless position sensing. The tie-rod construction keeps the body length compact at 140 mm plus stroke, and the adjustable air cushion at each end decelerates the 21 mm cushion stroke to reduce end-of-travel impact.
| Model | Airtac SC32 Standard Cylinder SC32X210S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The built-in magnet and 210 mm stroke suit small-part pick-and-place or clamping fixtures where CMSG sensors confirm end-of-stroke position to a PLC.
With 402 N of push at 0.5 MPa, this 32 mm bore cylinder can actuate a lightweight diverter gate on a conveyor line, with the non-standard stroke providing extra reach.
The clean, filtered-air operation and magnetic piston sensing make it a fit for automating test-tube handling or sample preparation stages where stroke length is critical.
For applications needing more force, stepping up to the 40 mm bore SC40 series provides 628 N of push at 0.5 MPa. If a shorter, standard stroke is acceptable, the SC32X200 is the nearest stocked alternative. At this 210 mm extension, ensure the rod is not subjected to significant side loading; an external linear guide or a guided cylinder should be paired with the unit to protect the rod bearing from bending moments.
When replacing an existing cylinder, match five points: 32 mm bore, 210 mm stroke, PT1/8 port thread, the built-in magnet for sensor compatibility, and the basic mounting style. This SC model is a tie-rod cylinder and is dimensionally shorter than an ISO 15552 profile cylinder, so it is not a drop-in replacement for that standard.
Quick checklist
At 0.5 MPa the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No, the maximum standard stroke for a 32 mm bore SC cylinder is 1000 mm, but 210 mm is not a standard increment. This specific model is a non-standard, made-to-order stroke length. Standard strokes include 200 mm and 250 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.