The AirTAC Airtac SC32 Standard Cylinder SC32X210SH is a genuine double-acting standard air cylinder with a Ø32mm bore and 210mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X210SH is a double-acting tie-rod cylinder with a 32 mm bore and 210 mm stroke, delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide smooth deceleration for light automation tasks.
This variant includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors, enabling precise end-of-stroke detection. The -H suffix specifies Viton (FKM) seals, extending the operating temperature range to 0–150 °C, making it suitable for hot environments where standard TPU seals would degrade.
| Model | Airtac SC32 Standard Cylinder SC32X210SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The Viton seals allow this cylinder to operate reliably in 0–150 °C environments, such as near heated platens, drying ovens, or autoclave loading systems, where standard seals would fail.
The built-in magnet enables CMSG/DMSG sensors to confirm open/closed positions, making it ideal for small part sorting gates or diverter chutes requiring positive position feedback in automated lines.
With 724 N of force at 0.9 MPa, this 32 mm bore cylinder suits light-duty clamping, pressing, or staking fixtures where space is limited but reliable high-temperature performance is required.
For applications requiring slightly more force, stepping up to the 40 mm bore SC40 series provides 628 N at 0.5 MPa. The 210 mm stroke is well within the 1000 mm maximum standard stroke for the 32 mm bore, ensuring standard lead times. When replacing an existing cylinder, match the 32 mm bore, 210 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic mounting configuration exactly to ensure drop-in compatibility with another AirTAC SC unit.
Quick checklist
At the standard 0.5 MPa operating pressure, the cylinder provides 402 N pushing force and 345 N pulling force. At the maximum operating pressure of 0.9 MPa, the pushing force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes. The -H suffix denotes Viton (FKM) seals, which are rated for continuous operation from 0 to 150 °C. This is a significant upgrade from the standard TPU seals, which are limited to -20 to +70 °C. Ensure all connected fittings and tubing are also rated for the operating temperature.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.