The AirTAC Airtac SC32 Standard Cylinder SC32X210SN is a genuine double-acting standard air cylinder with a Ø32mm bore and 210mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X210SN is a double-acting single-rod pneumatic cylinder delivering 402 N of push force at 0.5 MPa, making it a compact workhorse for light automation. Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration at end-of-stroke, while the NBR seals ensure consistent performance in standard industrial environments.
With a body length of 140 mm and a 210 mm stroke, this tie-rod cylinder offers a compact extended profile suitable for space-constrained fixtures. The PT1/8 port threads accept standard pneumatic fittings, and the M10x1.25 rod thread allows direct tooling attachment for pushing, clamping, or ejecting tasks.
| Model | Airtac SC32 Standard Cylinder SC32X210SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Delivers a crisp 402 N push at 0.5 MPa to eject plastic or metal components from injection molds or stamping dies, with the 210 mm stroke clearing the tooling area.
Operates a lightweight diverter flap on a conveyor line. The NBR seals handle the frequent cycling, and the adjustable cushion reduces impact noise at the end of the 210 mm travel.
Provides consistent pressing force for hot-stamp foiling or label application. The M10x1.25 rod thread accepts custom press platens, and the 21 mm cushion absorbs the stamping impact.
Choose the SC32 when your application requires up to 724 N of force at the maximum operating pressure of 0.9 MPa. If you need more thrust, step up to the SC40 which provides 628 N at 0.5 MPa. For this 210 mm stroke, ensure the load is guided and side forces are minimal; the 12 mm rod is not designed to absorb bending moments.
For a direct replacement, match five key attributes: 32 mm bore, 210 mm stroke, PT port thread, NBR seal material, and the basic mounting configuration. This model does not include a magnet, so if you need position sensing, select the -S variant and add CMSG or DMSG sensors.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. Use it to replace another AirTAC SC32 tie-rod cylinder with matching bore, stroke, port, and mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.