The AirTAC Airtac SC32 Standard Cylinder SC32X210STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 210mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X210STC is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 210 mm stroke combines with a 12 mm diameter piston rod and a 21 mm adjustable air cushion at each end to decelerate the load smoothly.
This model includes a built-in magnet (-S) for mounting CMSG/DMSG/EMSG sensors directly on the tie-rod barrel, plus a centre trunnion mount (TC) with the TCM1 bracket (F-SC32TC) for pivoting applications. The body length A is 140 mm, giving a compact extended length of approximately 350 mm.
| Model | Airtac SC32 Standard Cylinder SC32X210STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 210 mm stroke and trunnion mount allow the cylinder to pivot as it diverts lightweight packages or components on a conveyor line, with sensor confirmation via the built-in magnet.
Delivers 724 N of clamping force at 0.9 MPa to hold small workpieces during drilling or bonding, where the compact tie-rod body fits into tight fixture spaces.
The adjustable cushion and 30-800 mm/s speed range make this cylinder suitable for repetitive life-cycle testing of switches or small mechanical components in a lab environment.
Choose the SC32 bore for light pneumatic tasks where its 402 N push at 0.5 MPa is sufficient. If your application demands more force, step up to the SC40 bore, which provides 628 N at the same pressure. For strokes over 300 mm on this 12 mm rod, evaluate side-load conditions carefully; an external linear guide or a guided cylinder is recommended to protect the rod bearing from bending moments.
When replacing an existing cylinder, match five points: 32 mm bore, 210 mm stroke, PT1/8 port thread, centre trunnion (TC) mounting with the TCM1 bracket, and the built-in magnet for sensor compatibility. This tie-rod cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with that standard.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N and pulls with 345 N. At the standard 0.7 MPa supply, push force rises to 563 N. The maximum push force at the 0.9 MPa operating limit is 724 N.
Yes. The -S suffix in the model code means a magnet is built into the piston. You can clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder barrel to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.