The AirTAC Airtac SC32 Standard Cylinder SC32X215 is a genuine double-acting standard air cylinder with a Ø32mm bore and 215mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X215 is a compact double-acting pneumatic cylinder with a 32 mm bore and a 215 mm non-standard stroke, extending beyond the standard 1000 mm maximum for this bore size. It generates 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, making it suitable for light-duty linear tasks.
This tie-rod cylinder features a 12 mm diameter piston rod with an M10x1.25 thread, an adjustable air cushion of 21 mm, and PT1/8 ports. The body length is 140 mm, resulting in a total extended length of approximately 355 mm.
| Model | Airtac SC32 Standard Cylinder SC32X215 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 215 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×215 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Actuates diverter gates on compact conveyor systems, reliably pushing lightweight items with its 402 N force at standard line pressure.
Provides consistent, low-force clamping for delicate electronic or plastic components during assembly, preventing part damage.
Controls the opening and closing of seed chutes on automated planting equipment, operating reliably in dusty environments.
For applications needing more force, consider stepping up to the 40 mm bore SC40 series, which provides 628 N at 0.5 MPa. The 215 mm stroke is non-standard for the 32 mm bore, so it is a made-to-order configuration. Ensure the rod is adequately supported against side loads, especially given its extended length relative to the small 12 mm rod diameter.
When replacing an existing cylinder, match five key points: 32 mm bore, 215 mm stroke, PT1/8 port thread, basic mounting (no accessories), and the absence of a magnetic piston. This ensures a direct, form-fit replacement for another AirTAC SC32 tie-rod cylinder.
Quick checklist
At 0.5 MPa, the theoretical push force is 402 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is dimensionally shorter than an ISO 15552 profile cylinder. It is not interchangeable with ISO 15552 standards. It is a direct replacement only for another AirTAC SC32 tie-rod cylinder with matching bore, stroke, and port thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.