The AirTAC Airtac SC32 Standard Cylinder SC32X220 is a genuine double-acting standard air cylinder with a Ø32mm bore and 220mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X220 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm piston rod and 21 mm adjustable air cushion make it well-suited for light automation tasks where space is limited.
With a body length of 140 mm and a 220 mm stroke, this cylinder provides a total extended length of approximately 360 mm. It features PT1/8 ports and an M10x1.25 rod thread, operating reliably on filtered air from -20 to +70 °C with standard TPU seals.
| Model | Airtac SC32 Standard Cylinder SC32X220 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Provides the 402 N force needed for pressing bushings or connectors in benchtop assembly fixtures, with a 220 mm stroke for clear part loading access.
Actuates lightweight diverter gates on mini-conveyors. The adjustable cushion ensures quiet, low-impact operation at speeds up to 800 mm/s.
Operates test-tube capping or slide-handling mechanisms in clean lab environments, using the standard TPU seals and filtered compressed air.
For applications needing more force, stepping up to the 40 mm bore SC40 series provides 628 N at 0.5 MPa. This SC32X220 is ideal for lighter, high-cycle pick-and-place or clamping operations. When replacing an existing unit, match five key points: 32 mm bore, 220 mm stroke, PT1/8 port thread, basic mounting (no brackets), and ensure the magnet option (-S) matches if sensors are used.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder (140 mm body for the 32 bore). It is dimensionally interchangeable only with another AirTAC SC32 tie-rod cylinder of the same stroke and port configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.