The AirTAC Airtac SC32 Standard Cylinder SC32X220S is a genuine double-acting standard air cylinder with a Ø32mm bore and 220mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X220S is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa) from its 32 mm bore. The 220 mm stroke is well within the 1000 mm maximum standard stroke for this bore, and the 12 mm diameter piston rod provides reliable linear actuation for light to medium-duty tasks.
This model includes the -S suffix, equipping the cylinder with a built-in magnet that allows CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the tie-rod barrel for non-contact position sensing. The adjustable air cushion (21 mm) at both ends decelerates the piston smoothly, protecting end caps from impact damage.
| Model | Airtac SC32 Standard Cylinder SC32X220S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The built-in magnet and CMSG/DMSG sensor compatibility make this cylinder ideal for automated assembly stations where end-of-stroke confirmation is required for cycle initiation.
With 402 N of push force at 0.5 MPa, the SC32X220S can actuate diverter gates on small-package conveyor lines, providing reliable 220 mm linear travel.
The 220 mm stroke and compact 32 mm bore suit pick-and-place units handling small components, where position feedback ensures accurate transfer between stations.
Choose the SC32X220S when your application needs a compact 32 mm bore with sensor feedback capability. If you require more force, stepping up to the SC40 bore provides 628 N push at 0.5 MPa. For strokes beyond 300 mm, consider external guides or a guided cylinder to protect the 12 mm rod from side-load bending.
When replacing an existing cylinder, match five points: 32 mm bore, 220 mm stroke, PT1/8 port thread, the built-in magnet (-S) for sensor mounting, and your required mounting accessory (this unit is basic, without brackets). The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes. The -S suffix means this cylinder has a built-in magnet, so you can clamp AirTAC CMSG, DMSG, or EMSG sensors directly onto the barrel for non-contact position detection at any point along the stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.