The AirTAC Airtac SC32 Standard Cylinder SC32X220STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 220mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X220STC is a double-acting tie-rod cylinder with a 32 mm bore and 220 mm stroke, delivering a push force of 402 N at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide smooth deceleration for light automation tasks.
This model is factory-configured with a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and a centre trunnion (TC) mount supplied with the TCM1 bracket (F-SC32TC). The trunnion allows the cylinder body to pivot, accommodating swinging loads without rod side-loading. Operating pressure is 0.15–1.0 MPa with TPU seals rated for -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X220STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 220 mm stroke and trunnion mount allow the cylinder to pivot and divert lightweight packages or components on a conveyor line, with sensor confirmation of each cycle.
Delivers 402 N of push force to clamp small workpieces in a jig. The built-in magnet enables end-of-stroke sensing for automated cycle start.
Ideal for positioning pipette tips or vial trays in compact lab instruments. The TPU seals and filtered air operation suit clean, light-duty environments.
Choose the SC32 for applications needing up to 402 N at 0.5 MPa. If your load exceeds this, stepping up to the SC40 provides 628 N at the same pressure. For strokes over 300 mm on this 12 mm rod, consider an external guide to prevent rod bending under side load.
To replace an existing cylinder, match five points exactly: 32 mm bore, 220 mm stroke, PT port thread, centre trunnion (TC) mounting with the TCM1 bracket, and the built-in magnet (-S) for sensor compatibility. This tie-rod design is shorter than ISO 15552 cylinders and is not dimensionally interchangeable with them.
Quick checklist
At 0.5 MPa the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The SC32 is a double-acting cylinder and will drift or drop if pressure is exhausted or the directional valve is centred. For load holding without live pressure, you must add an external rod brake, mechanical lock, or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.