The AirTAC Airtac SC32 Standard Cylinder SC32X225STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 225mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X225STC is a 32 mm bore double-acting pneumatic cylinder with a 225 mm stroke, pre-configured with a built-in magnet and a centre trunnion mounting. It generates a push force of 402 N at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod with an M10x1.25 rod-end thread.
This tie-rod cylinder features an adjustable air cushion at both ends with a 21 mm cushion length, allowing you to dial in smooth deceleration for faster cycle rates. The -S magnet lets you clamp CMSG or DMSG sensors directly onto the barrel for non-contact position sensing, while the TC trunnion mount (F-SC32TC, supplied with TCM1 bracket) allows the cylinder to pivot, making it ideal for swinging or articulating loads.
| Model | Airtac SC32 Standard Cylinder SC32X225STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 225 mm stroke and centre trunnion mount allow this cylinder to pivot a small diverter gate on a conveyor line, directing lightweight packages with the 402 N push force.
With the built-in magnet for end-of-stroke sensing and a trunnion pivot, it actuates a swinging clamp arm to hold small components during assembly or light machining.
The adjustable cushioning and precise sensor feedback make it suitable for oscillating a test-platform linkage, providing consistent 225 mm displacement in a compact tie-rod package.
Choose the SC32 when your application needs up to 402 N of push force at standard plant pressure. If you need more force, stepping up to the SC40 provides 628 N at the same 0.5 MPa. For a 225 mm stroke, the 12 mm rod is well-supported within the standard range, but always avoid direct side loading on the rod. For a drop-in replacement, match the 32 mm bore, 225 mm stroke, PT1/8 port thread, TC centre trunnion mount, and the -S magnet feature.
Quick checklist
At 0.7 MPa operating pressure, the 32 mm bore double-acting cylinder produces a theoretical push force of 563 N. The pull force on the retract stroke is lower due to the 12 mm rod area and is 345 N at 0.5 MPa.
Yes. The -S suffix indicates a built-in magnet around the piston, specifically designed for mounting AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder barrel's sensor slots for contactless position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.