The AirTAC Airtac SC32 Standard Cylinder SC32X25FA is a genuine double-acting standard air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X25FA is a compact double-acting pneumatic cylinder with a 32 mm bore and a short 25 mm stroke, delivering a push force of 402 N at 0.5 MPa (max 724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable end-of-stroke deceleration for light positioning and clamping tasks.
This model is configured with a front rectangular flange (FA) for secure panel or bulkhead mounting. The standard PT1/8 port thread and TPU seals suit general industrial air service from -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X25FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 25 mm stroke and 402 N push force reliably eject lightweight plastic or metal parts from small assembly fixtures.
Ideal for gentle clamping of electronics or delicate components where full 0.9 MPa force is not required.
Quickly actuates small diverter gates on mini conveyors, with the front flange simplifying mounting to the frame.
For applications needing more force, step up to the 40 mm bore SC40 series, which provides 628 N of push at 0.5 MPa. The 25 mm stroke is ideal for short eject or clamping motions; ensure the load is guided to prevent side forces on the 12 mm rod. When replacing, match bore, stroke, PT port thread, and the FA front flange mount (accessory F-SC32FA).
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
Yes, this model includes the FA front rectangular flange (F-SC32FA), which bolts directly to a panel or machine frame on the rod side for a rigid, fixed installation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.