The AirTAC Airtac SC32 Standard Cylinder SC32X25SLB is a genuine double-acting standard air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X25SLB is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 25 mm stroke suits short linear positioning tasks, and the built-in magnet enables direct mounting of CMSG/DMSG/EMSG sensors for end-of-stroke detection.
This model includes an LB foot mount (F-SC32LB) for secure surface installation and operates with filtered air from -20 to +70 °C using standard TPU seals. The 12 mm piston rod and PT1/8 ports keep the unit lightweight yet capable for small automation cells.
| Model | Airtac SC32 Standard Cylinder SC32X25SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Short-stroke ejection of small plastic or metal parts from injection molds or stamping dies, using the magnetic piston for cycle confirmation.
Actuating miniature diverter gates on conveyor lines for sorting small packages, with the LB mount providing a stable fixed base.
Positioning test tubes or slides in compact diagnostic equipment, where the 25 mm stroke and clean filtered air operation are ideal.
Choose the SC32X25SLB when 402 N at 0.5 MPa meets your load requirement. If you need more force, step up to the SC40 series (628 N at 0.5 MPa). For replacement, match the 32 mm bore, 25 mm stroke, PT1/8 ports, LB foot mount, and the -S magnet option exactly to ensure sensor compatibility. The short 25 mm stroke is inherently rigid, but always align the load axially to prevent rod bending.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes, the -S suffix indicates a built-in magnet. You can mount AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly on the barrel to detect piston position without external brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.