The AirTAC Airtac SC32 Standard Cylinder SC32X300 is a genuine double-acting standard air cylinder with a Ø32mm bore and 300mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X300 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 32 mm bore and 300 mm stroke suit light automation tasks where space is limited but a moderate reach is required.
Built with a 12 mm diameter piston rod and an adjustable air cushion (21 mm length), this cylinder decelerates the piston smoothly at stroke end. The PT1/8 port and M10x1.25 rod thread connect easily to standard pneumatic circuits. Total body length A is 140 mm, keeping the assembly compact.
| Model | Airtac SC32 Standard Cylinder SC32X300 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushes lightweight components off a conveyor or out of a nest with 402 N at 0.5 MPa, ideal for pick-and-place stations.
Operates a small diverter flap on a packaging line, using the 300 mm stroke to swing the gate through its full arc.
Extends a probe or sampling needle into a test stream with repeatable 300 mm reach, driven by clean compressed air.
For higher force, step up to the SC40 (628 N at 0.5 MPa). For lighter, shorter-stroke tasks, the SC32 in a 200 mm or 250 mm stroke reduces overall length. At 300 mm stroke, ensure the rod is not subjected to side load; if the load is not guided externally, add an external guide or switch to a guided cylinder to prevent rod bending.
When replacing an existing cylinder, match five points: 32 mm bore, 300 mm stroke, PT thread, basic mounting (no bracket), and confirm the magnet option (this model has no built-in magnet).
Quick checklist
At 0.5 MPa, push force is 402 N and pull force is 345 N. At the maximum operating pressure of 0.9 MPa, push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
This SC32X300 does not have the -S suffix, so it has no built-in magnet. To use CMSG/DMSG/EMSG sensors, order model SC32X300-S instead. The standard model requires external limit switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.