Airtac SC32 Standard Cylinder SC32X300CA
The AirTAC Airtac SC32 Standard Cylinder SC32X300CA is a genuine double-acting standard air cylinder with a Ø32mm bore and 300mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke300 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X300CA
The SC32X300CA is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion make it well-suited for light automation tasks requiring smooth end-of-stroke deceleration.
This model features a rear single clevis mount (CA) for pivoting applications, allowing the cylinder to swing during operation. The 300 mm stroke falls within the standard range for the 32 mm bore, which supports strokes up to 1000 mm. The body length A is 140 mm, giving a total extended length of approximately 440 mm.
Airtac SC32 Standard Cylinder SC32X300CA Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X300CA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X300CA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X300CA Is Used
Small Part Diverter
The 300 mm stroke and rear clevis mount allow the cylinder to pivot as it pushes items off a conveyor line, handling the 402 N force needed for lightweight package sorting.
Clamping Fixture
Provides 724 N of clamping force at 0.9 MPa for holding small workpieces during drilling or assembly. The adjustable cushion reduces vibration at the end of the 300 mm stroke.
Hopper Gate Actuator
Operates a sliding gate on a small material hopper. The rear clevis mount accommodates the arc of motion, and the 21 mm cushion length absorbs impact during fast cycling.
Is the Airtac SC32 Standard Cylinder SC32X300CA the Right Cylinder?
Choose the SC32X300CA when your application needs up to 402 N of force at standard plant air pressure. If you require more force, step up to the 40 mm bore (SC40 series), which provides 628 N at 0.5 MPa. For strokes of 300 mm and above, ensure the load is guided externally to prevent side-load bending on the 12 mm rod.
For direct replacement, match five key points: 32 mm bore, 300 mm stroke, PT port thread, rear single clevis mounting (CA, using bracket F-SC32CA), and no magnet. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X300CA FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 cylinder. It is not dimensionally interchangeable. It directly replaces another AirTAC SC32 cylinder with the same bore, stroke, PT port, and CA clevis mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X300CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.