The AirTAC Airtac SC32 Standard Cylinder SC32X300SFA is a genuine double-acting standard air cylinder with a Ø32mm bore and 300mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X300SFA is a double-acting single-rod pneumatic cylinder delivering 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa. With a 32 mm bore and a 300 mm stroke, this model is well-suited for medium-reach clamping, sorting, and light material-transfer tasks where a compact tie-rod body is preferred.
This configuration includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors, enabling precise end-of-stroke detection. The FA front rectangular flange (F-SC32FA) provides rigid panel mounting at the rod end, while the 12 mm diameter rod with M10x1.25 thread and PT1/8 ports ensures easy integration into standard pneumatic circuits. The body length A is 140 mm, giving a total extended length of approximately 440 mm.
| Model | Airtac SC32 Standard Cylinder SC32X300SFA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 300 mm stroke and magnetic piston sensing make this cylinder ideal for sorting gates on small conveyor lines, where end-of-stroke confirmation is required for each cycle.
With 724 N of maximum thrust, it reliably pushes lightweight cartons or products onto a packaging line, and the front flange mount allows direct attachment to the machine frame.
The compact 140 mm body and precise sensor feedback suit automated sampling or test fixtures where repeatable linear motion and clean, filtered air operation are essential.
Choose the SC32 bore for light-duty applications requiring up to 724 N of thrust. If your load demands more force, step up to the SC40 bore, which provides 879 N at 0.7 MPa. For this 300 mm stroke, ensure the 12 mm rod is adequately supported if any side load is present; an external linear guide is recommended to prevent rod bending and premature seal wear.
When replacing an existing cylinder, match five key points: 32 mm bore, 300 mm stroke, PT1/8 port thread, FA front flange mounting, and the built-in magnet (-S) for sensor compatibility. This tie-rod cylinder is dimensionally shorter than an ISO 15552 profile and is a direct replacement only for another AirTAC SC32 or equivalent tie-rod design with matching specifications.
Quick checklist
At the standard operating pressure of 0.7 MPa, the push force is 563 N and the pull force is 483 N. The maximum push force at 0.9 MPa is 724 N. These values are based on the 32 mm bore and 12 mm rod diameter.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. Use it to replace another AirTAC SC32 tie-rod cylinder with matching bore, stroke, PT port, FA front flange mount, and magnetic piston.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.