The AirTAC Airtac SC32 Standard Cylinder SC32X310S is a genuine double-acting standard air cylinder with a Ø32mm bore and 310mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X310S is a double-acting single-rod pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). With a 32 mm bore and 310 mm stroke, it is built for light automation tasks requiring mid-range linear travel. The 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable end-of-stroke deceleration.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for contactless position feedback. The total extended body length is approximately 450 mm (140 mm body length A plus stroke), making it a compact choice where space is limited.
| Model | Airtac SC32 Standard Cylinder SC32X310S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 310 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×310 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The built-in magnet allows CMSG sensors to confirm retraction before a conveyor indexes, preventing jams in small-part handling systems.
Delivers 724 N at 0.9 MPa for holding thin-gauge sheet metal or plastic components during ultrasonic welding or gluing operations.
Actuates flipper gates on packaging lines. The 310 mm stroke provides enough travel to redirect small cartons between two conveyor lanes.
Choose the SC32X310S when your application needs roughly 400 N of force and sensor-based position sensing. If you require more force, step up to the SC40 series which provides 628 N at 0.5 MPa. For strokes over 300 mm, be cautious of side loads—the 12 mm rod can bend under lateral stress. Always use an external linear guide or rod support if the load is not perfectly axial.
For drop-in replacement, match the 32 mm bore, 310 mm stroke, PT1/8 port thread, basic mounting (no brackets), and the built-in magnet feature. This is a genuine AirTAC tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC32 models.
Quick checklist
At 0.7 MPa operating pressure, the theoretical push force is 563 N. The pull force on the retract stroke is slightly lower due to the 12 mm rod area, delivering 345 N at 0.5 MPa.
Yes. The -S suffix indicates a built-in magnetic piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder's tie-rod barrel to detect end-of-stroke positions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.