The AirTAC Airtac SC32 Standard Cylinder SC32X315 is a genuine double-acting standard air cylinder with a Ø32mm bore and 315mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X315 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (563 N at 0.7 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion make it well-suited for light-duty clamping, sorting, and pressing tasks where a stroke of 315 mm is required.
With a body length of 140 mm, the total extended length reaches 455 mm. The PT1/8 ports and M10x1.25 rod thread offer straightforward pneumatic connections. This model uses the standard TPU seal for reliable operation from -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X315 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 315 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×315 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushes small plastic or metal parts out of injection molds or off assembly fixtures with a controlled 315 mm stroke.
Acts as a diverter arm on a conveyor line, extending 315 mm to guide cartons into the correct lane at moderate speed.
Applies consistent 402 N clamping pressure to hold workpieces during gluing or light machining operations.
For applications needing more force, stepping up to the SC40 bore provides 628 N of push at 0.5 MPa. At a 315 mm stroke, ensure the rod is not subjected to significant side loads; an external linear guide is recommended to prevent rod bending and premature seal wear. When replacing, match bore (32), stroke (315), port thread (PT1/8), and the basic mounting configuration.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N. At 0.7 MPa it increases to 563 N, and the maximum theoretical force at 0.9 MPa is 724 N.
No. The SC series is a tie-rod cylinder and is shorter than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC32 cylinder with the same stroke and port configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.