The AirTAC Airtac SC32 Standard Cylinder SC32X320S is a genuine double-acting standard air cylinder with a Ø32mm bore and 320mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X320S is a double-acting tie-rod cylinder with a 32 mm bore and 320 mm stroke, delivering a push force of 402 N at 0.5 MPa (up to 724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide smooth deceleration for light to medium automation tasks.
This model includes a built-in magnet, allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for precise position feedback. The compact tie-rod design makes it a genuine AirTAC solution for space-constrained applications requiring reliable pneumatic actuation.
| Model | Airtac SC32 Standard Cylinder SC32X320S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 320 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×320 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 320 mm stroke and magnetic piston enable precise end-of-stroke sensing for diverting or sorting small components on compact conveyor lines.
Ideal for pressing, inserting, or ejecting parts in benchtop assembly fixtures where 402 N of force is sufficient and position confirmation is required.
The clean, oil-free air operation and sensor-ready design suit sample handling and test equipment requiring repeatable 320 mm linear motion.
For applications needing more force, step up to the SC40 bore which provides 628 N push at 0.5 MPa. With a 320 mm stroke, ensure the 12 mm rod is adequately supported against side loads; consider an external guide or linear rail if the load is not purely axial. When replacing an existing unit, match five points: 32 mm bore, 320 mm stroke, PT1/8 port thread, basic mounting (no bracket), and the -S magnet option for sensor compatibility.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
Yes. The -S suffix indicates a built-in magnet, so you can clamp CMSG, DMSG, or EMSG sensors directly onto the barrel to detect piston position without external brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.