The AirTAC Airtac SC32 Standard Cylinder SC32X350 is a genuine double-acting standard air cylinder with a Ø32mm bore and 350mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X350 is a double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 12 mm rod and 21 mm adjustable air cushion provide smooth deceleration for light-to-medium pneumatic tasks.
With a 350 mm stroke and a compact body length A of 140 mm, this genuine AirTAC actuator fits where space is tight. The PT1/8 port and M10x1.25 rod thread are standard across the SC32 series, making it a direct replacement for existing installations.
| Model | Airtac SC32 Standard Cylinder SC32X350 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 350 mm stroke and 402 N push force efficiently actuate diverter gates on compact conveyor lines, sorting lightweight packages without overpowering the mechanism.
Ideal for light-duty assembly jigs, the SC32X350 applies consistent clamping pressure for gluing or staking small components, with the adjustable cushion preventing impact marks.
Smooth, clean operation at 30-800 mm/s suits test fixtures and lab automation where a 350 mm linear stroke is needed to position sensors or sampling probes.
Select the SC32 when force requirements are modest and speed is a priority—this bore handles 30-800 mm/s. If you need more push force, step up to the SC40 (628 N at 0.5 MPa). For strokes of 300 mm or more, ensure the 12 mm rod is adequately supported against side loads; an external guide or rod-alignment coupler is recommended to prevent bending and premature seal wear. To match an existing cylinder, verify five points: 32 mm bore, 350 mm stroke, PT1/8 thread, basic mount, and no magnet.
Quick checklist
At the standard 0.5 MPa operating pressure, the SC32X350 produces 402 N pushing force and 345 N pulling force. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder of the same bore and stroke. It is not dimensionally interchangeable with ISO 15552. Only replace with another AirTAC SC32 tie-rod cylinder matching the bore, stroke, PT port, and mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.